Roll-up door repair in Los Angeles
Roll-up doors keep storage rooms, loading bays and shops closed. When one jams, drifts or will not lift, the building is open or shut by accident. We repair rolling doors and get them moving again.
- Rolling steel doors
- Loading bays and storage
- Jammed or stuck doors
A different door with different failures
A roll-up door is a curtain of steel slats that winds around a drum above the opening. It runs in side guides and is driven by a motor or by a hand chain.
Failures follow that design. The curtain can come out of its guides, the slats can bend or catch, the drum and its spring can lose their balance, and the operator can stop responding.
We look at each of those parts, tell you what we find and repair the door so it rolls up and down cleanly again. Doors on businesses are used hard and often, so a repair that is done properly matters.
- Curtains out of their guides
- Bent or damaged slats
- Drum and spring balance
- Motors, chains and operators
- Doors that will not lift or will not stay down
What you get with Roll-up door repair
Doors that close and stay closed
A rolling door that will not shut leaves a building open. We repair it so it closes properly.
The curtain, the guides, the drum
We check every part of the assembly, not only the one that is making the noise.
Built for businesses
We work on doors that are opened many times a day, and we explain what has worn.
Phone open 24 hours
A door that fails at closing time can be reported at any hour.
Signs a roll-up door needs repair
These show up at the opening.
- The curtain sits crooked or has left the guides
- A slat is bent or catches as it winds
- The door is stiff to lift by hand
- The motor runs but the door does not move
- The door drifts down on its own
How the repair goes
We keep the building secure as we work.
We look at the door in motion and at rest
We tell you what has bent, worn or jammed
We repair or replace the parts that failed
We test the door through several cycles
Storage rooms and shops
Roll-up doors are common on storage units, shops and service bays. If your door is one of them, tell us what kind of building it is when you call, so we can bring the right parts.
Roll-up door repair questions
What is the difference between a roll-up door and a sectional door?
A sectional door lifts in hinged panels along tracks. A roll-up door winds a flexible curtain of slats around a drum above the opening.
Can a bent slat be repaired?
Often the damaged slat or section can be dealt with. We look at the curtain and tell you what the repair involves.
Why will my roll-up door not lift?
A jammed curtain, a worn drum or spring, or a failed operator can all do it. We check each in turn.
Do you repair doors on commercial buildings?
Yes. Commercial doors are part of our work.
Other services we provide
Commercial garage doors
Overhead and roll-up doors on shops, offices and loading bays: repair and installation.
Garage door springs
Broken springs, frayed cables and worn drums, replaced and tested so the door lifts evenly again.
Garage door repair
Noisy, slow or crooked doors, bent tracks, worn rollers and hinges, and damaged panels.
The photographs are illustrative AI images, not jobs of ours.
Roll-up door stuck?
Tell us what the door or gate is doing and leave your number. We call you back.